Service, South Wales
Furniture Spraying & Refinishing.
Heirloom pieces, modern furniture,
restored to a flawless finish.
Wardrobes, sideboards, vanities, dressers, fitted bedroom furniture, refinished in our spray facility or on-site in your home. A factory-grade finish on the pieces you already own and love.
10+
Years on the spray gun
1,000+
Pieces refinished
Yes
Insurance-backed guarantee
Both
Workshop & on-site
Yes
Bespoke colour matching
The service
What you're actually getting, and why it works.
We do one thing: spraying. No general building, no chasing trades, just an obsessive standard of preparation and a finish that holds up in everyday use.
About Elite RefinishingWhat it is
Furniture spraying is the controlled refinishing of free-standing, fitted and built-in furniture using industrial cabinet coatings, taking pieces from dated, scratched or wrong-coloured to a smooth, even, factory-style finish.
Who it's for
Homeowners refurbishing inherited furniture, interior designers updating client pieces, hospitality and short-let owners refreshing units between bookings, and anyone with fitted bedroom furniture they don't want to replace.
When you need it
When you love the piece but not the colour. When a renovation has changed the room's palette and a perfectly good wardrobe no longer fits. When a child's bedroom needs to grow up. When the dog has destroyed the legs of a sideboard you actually like.
Why it matters
Because solid furniture is increasingly rare, most off-the-shelf replacements are chipboard and foil. Spraying lets you keep the construction quality you already own and update only what's visible.
The cost of getting it wrong
The slow, expensive trap of replacing furniture.
Replacement quality is dropping
Mass-market furniture today is chipboard, MDF and foil. If your existing piece is solid timber or quality MDF, replacing it usually means downgrading the build quality.
DIY chalk paint scratches off
Chalk paint and waxes are decorative, they are not designed for handle-touched, daily-use furniture. They scratch within months, especially on wardrobes and kitchen-adjacent vanities.
Mismatched pieces destroy a room
One piece in the wrong tone makes the whole scheme look amateur. Spraying gets every piece onto the same palette.
Fitted furniture cannot easily be replaced
Built-in wardrobes and alcove units cannot be lifted out and swapped. Spraying is often the only way to update them without major joinery.
The process
Five steps. Zero guesswork.
Inspection
Site visit or photo survey. We assess the substrate, scope and ideal coating system.
Fixed-Price Quote
A clear written quote, no day rates, no surprises. You know exactly what you're paying.
Prep & Mask
Where the finish is won. Surfaces decontaminated, keyed, filled, primed and everything around them protected.
Spray
Multiple thin coats of industrial coating, hand-applied in your chosen colour and sheen.
Test & Reveal
Inspection in working light, touch-in where needed, refit, walk-through and guarantee certificate.
The benefits
What you actually get for the money.
Factory-grade smoothness
Hand-sprayed two-pack lacquer for a finish that looks like it was bought new.
Far less than replacement
Especially for fitted, bespoke or solid timber pieces.
Any colour, any sheen
Match an existing scheme, the new kitchen, or a designer's specification.
Durable for daily use
Cabinet-grade coatings that handle wardrobe handles, vanity splashes and wear.
Workshop or on-site
Loose pieces sprayed in our facility; fitted pieces sprayed in your home with full masking.
Quick turnaround
Most pieces are done within a week of pickup.
How it's done
Inside a proper furniture refinish.
Furniture is where preparation matters most, pieces are looked at up close, often in daylight, and any shortcut shows. This is how we handle yours.
Variations we cover
- Fitted bedroom wardrobes
- Free-standing wardrobes, dressers and chests
- Sideboards and TV units
- Bathroom vanities and storage
- Office furniture and reception desks
- Hospitality and short-let unit refresh
- Children's furniture refinishing
- Veneer restoration and refinishing
- Built-in alcove units and bookcases
Assessment and disassembly
We inspect joints, hinges, runners and any veneer lifting before quoting. Handles, hinges, drawer runners and glass are removed and bagged with reference photographs.
Strip, fill, sand
Old wax and silicone are removed (the silent killer of refinishing jobs). Dents and chips are filled with two-pack filler. Surfaces are sanded through grits to give the primer a true mechanical key.
Substrate-appropriate primer
Solid wood, MDF, veneer, melamine and foil each require a different primer system. We carry all four and select on the piece.
Sprayed in colour and sheen of choice
RAL, Farrow & Ball, Little Greene, designer brief or a matched chip, sprayed in matte, satin, semi-gloss or gloss.
Reassembly and protection
Hardware refitted, soft-close adjusted, glass re-set, and pieces wrapped for delivery or refitted in your home with felt-pad protection.
Recent work
Real projects, real finishes.
In motion
See the work on video.
A glimpse inside recent Elite Refinishing Co projects across South Wales.
Questions answered
Everything you wanted to ask before quoting.
Ready when you are
Get a clear, fixed-price quote, usually within 24 hours.
No pushy sales. No estimating gimmicks. Just a written quote you can act on, and an honest answer if a respray isn't the right call for your project.
Related services